How to operate CNC V-grooving machine safely

● CNC grooving machine should be maintained and operated by the specially-assigned person;
● The operator of CNC V-groover must pass the training of the professional department. After passing the examination and obtaining the qualification certificate, the operator can operate independently;
● Before the operation, wear long-sleeve work clothes (to prevent burning by the grooved debris from splashing), and gloves must be worn when loading and unloading the sheet metal;
● Before starting the V-grooving machine, check whether the machine table is clean, especially between clamps and table;
● Reset the origin after starting up. When working, check whether the workpiece conforms to the process requirements and correctly input the size and grooving depth;
● When the operator is put on the small sheet, remember to handle lightly. Before loading, clean the machine surface and the feeding table, and can not residual grooved wire and other sundries;
● When running the grooving machine, check if the sheet metal is pushing to the origin. The staff shall not extend the head and any part of the body into the machine motor area (to prevent hurt by the machine). The air gun and hand should not be placed under the fixed clamp;
● When the grooving machine is in moving, the operation must be stopped in case of a machine collision or a collision of the materials. First, reset the origin to prevent the moving of the origin at the time of the collision;
● After grooving, gently place the sheet in the designated position to prevent the workpiece from being scratched;
● After the operation, conduct the daily maintenance of the grooving machine, cut off the power supply and clean the workplace.